Car Model/Year/Engine Size: 2003 CE Mirage with factory lip kit. 4G15 SOHC (1.5l)
Condition: Cannot be road registered without a VIV due to repairable write off which only needed a bonnet and bumper for repair. Radiator supports and
rails are all straight. Few bumps, slight dents and scrapes around but reasonably straight. Will come up good with a cut/polish and is good enough for a track car
Heat wrapped 4-2-1 extractors with flex pipe
Decat pipe, stock exhaust/muffler
AC components removed from engine bay, PS remains with sorter belt
FTO BC reds coilovers all round, pillowball tops, camber bolts front
Evo 3 twin pot calipers/276mm disc front (seal kit put through 1 track day ago)
Rear disc conversion from Proton Gti
Evo 4 brake booster and master cylinder
FTO HEL braided lines at all four corners (brand new)
13mm Proton rear sway bar
Ultra Racing front strut brace
Cusco rear strut brace
15*7" Mazdaspeed MS-01R rims (centre bore machined to 56.1mm to fit Mitsu hubs) with 2x60% / 2x80% Potenza RE-02s.
nolathane ALK and lower control arm bushes
nolathane swaybar bushes
Rolled rear wheel arches.
Evo 4 Recaro front seats on factory rails (mint)
2 x 4 point harnesses
White faced tacho cluster, wired and working. Original there to show kms. I have done 0kms since installing.
230mm Momo steering wheel on no-name boss kit
Interior is stripped from B-pillar back
Extensive bolt in half-cage to CAMS spec. (main hoop with double diagonal, rear stays with single diagonal, rear harness bar)
rear VRX spoiler
4 no-name cookie cutters to skid (wont fit over evo brakes)
Location: Coburg, Melbourne
Asking Price: $3.5k ono
Please note, bonnet will be polished before sale.
0415 298 248
Edited by StuC, 25 October 2016 - 08:23 PM.